Share:
PolyCoat 717.01

PolyCoat 717.01

PolyCoat 717.01 is a protective coating and waterproofing for concrete which provides protection from abrasion, impact, and chemical attack. It is a two-component, 100% solids epoxy base, concrete coating. PolyCoat 717.01 meets New York State D.O.T. specifications for Item 717-01 (formerly 3631)

Tests

Results

Part A | Part B

Viscosity 9000 - 12000 CPS | 50 - 55 CPS
Brookfield RV 5/20 rpm | 1/20 rpm
Weight 12.4 lbs/gal | 10.76 lbs/gal
Ash Content 38.8%

MIXED COMPONENTS        


Properties

  • MIXING RATIO (parts A:B) 1:1 by Volume
  • POT LIFE, mins. 40
  • INITIAL CURE, hrs. 3
  • HARDENSS, Shore D (24 hours) 84
  • TENSILE STRENGTH, psi 7,000
  • TENSILE ELONGATION, % 3


USES:

PROTECTIVE COATING: Floor and wall, high-built waterproofing and chemical resistant coating for concrete, steel, wood, and other construction materials.

WATERPROOFING: Of bridge pedestals, piers, abutments, highway dividing walls, etc.

NON-SKID COATING: When used as a binder with suitable aggregate broadcast on it, it provides non-skid overlays for sidewalks and factory, warehouse, and other floors, protecting them form mild traffic and chemical attack.

COLOR

(Fed. Std. 595) Gray 16376,(Other colors available) COLOR FASTNESS Passes (exposure in weatherometer)

CHEMICAL RESISTANCE

  • Water
  • Diluited inorganic acids
  • Alkalies
  • Solvents
  • Sewage
  • Salts
  • Oils
  • Grease
  • Gasoline