Share:
PolyFlex 150

PolyFlex 150

PolyFlex-150 is a 100% solid, moisture insensitive epoxy system. It is a low modulous, mortar binder for use as a mortar overlay over concrete, steel and steel grid decks. It can withstand mechanical and thermal movements.

Tests

Results

PF-150 | PF-150 LV | PF-150 Gel

Viscosity Part A
3000 CPS | 1200 CPS | Gel 
Viscosity Part B 200-300 CPS | 200-300 CPS | Gel
Mixed Viscosity 1500 CPS | 600-800 CPS | Gel 
Pot Life
35 min | 35 min| 35 min
Cure Time 5-6 hours | 5-6 hours | 5-6 hours 
Tensile Strength PSI
3000 PSI | 3000 PSI | 3000 PSI
Tensile Elongation 20% min | 20% min | 20% min
Compressive Strength 7000 PSI Min | 7000 PSI Min | 7000 PSI Min 
Compressive Strength Mortar 7500 PSI Min | 7500 PSI Min | 7500 PSI Min
Compressive Modulous 10,000-150,000 PSI | 100,000-150,000 PSI | 100,000-150,000 PSI
Tensile Modulous 125,000 PSI | 125,000 PSI | 125,000 PSI

Uses

  • Patching
  • Water Proofing
  • Sealing
  • Creating a non-skid floor topping

It can be used on dry, damp, or wet surfaces

GRADES & TYPES 
    
1- PolyFlex-150. For Horizontal Surfaces
2- PolyFlex-150 LV For application by Spray
3- PolyFlex-150 Gel For Vertical application

ADVANTAGES
    
Insensitive · Flexible · Easy To Mix


SURFACE PREPARATION     

Blast track or scarify the surface. Remove dirt, dust, grease, oil, soap or any other contaminants and coatings which may prevent proper bond. For concrete, rinse with 10% Muriatic acid. Wash thoroughly with fresh water.

MIXING  

Mix two parts of Base to one part Hardener by volume.