Share:
Polylastic

Polylastic

Membrane Waterproofing

Polylastic is a highly elastic membrane waterproofing. It is a two-component, Epoxy system, capable of up to 200 % elongation. It withstands severe movements of most substrates and remains serviceable at temperatures of -60oF to 280oF. Polylastic Systems exhibit a high bond and can be applied to a wide varity of materials.

Tests Results Test Method
Mixing Ratio (Part A : Part B)
1 : 1 by volume 
Tensile Strength 
 2800.00 psi minimum
Elongation 200% minimum 
Tear Strength DIEA 380 PLI
ASTMD-624
Solids 100% by weight
Hardness 80 - 90  Shore A
Service Temperature  60°F to 200°F 
Low Temperature Flexibility
Passes
-60°F, 1/2" mandrel
Shelf Life
12 months minimum 
Pot Life
25 minutes 
Initial Cure
24 hours 
Water absorption Negligible after 90 days submersion
Adhesion Excellent Bond to Concrete and Wood
Water Vapor Transmission
0.02 Perm ASTDM E-96 Method B
Color
Gray 

 USES      

Terraces
Roads
Parking Garages
Tunnels
Foundations
Pool
Cavity walls
Lavatories
Walkways
Kitchens




ADVANTAGES
. Excellent adhesion to con crete, masonry, tile, wood, and other structural materials.
. Resistant to water, fuel, oils, and common chemicals.
. Easy handling and application.
. Permanently flexible and tough.