Non-Skid Gemstone Resinous Flooring Systems

Non-Skid Gemstone Resinous Flooring Systems

G-10tm Color Flooring Aggregates are specially designed for Epoxy Flooring Applications. Colors are fast , attractive and chemically bonded to clear quartz. Even when you abrade or break the quartz, the colors reflect from the other sides. Gem Stone Quartz  is highly chemical resistant to acids, alkalies , and solvents. Method of application: Broadcast or trowel.


  • Pearl White,Garnet Red, Onyx Black, Tourmaline Green, Citrine Beige, Moonstone Grey, Tiger's Eye Brown, Lapis Blue, Topaz Yellow, Jasper Tan, Sapphire Blue, Hematite Dark Grey. Custom Colors available.

Recommended Uses:

  • Commercial, Institutional, and Industrial Flooring. Warehouses, Art Galleries, Hospitals, Locker rooms, Garages, Ramps, Office Rooms, Food and Pharmaceutical production areas, Schools, Fire houses, Post Offices, Photo studios, Automotive centes, Battery rooms, Unit control rooms, Generator rooms, etc.


  • Solvent free, Water clear, Excellent chemical resistance, Excellent adhesion to concrete , steel, and wood, High gloss, Low temperature curing, Blush free.

Delta Polymers Inc Gymtex Resinous Flooring consists of the following:

  • Poly Seal 3300 - Epoxy Primer which penetrates into the pours of Concrete and gives excellent bond.
  • Poly Flex 350 Or Polythane 500 - 100% Solid Epoxy Liquid Binder which is flexible and has excellent bond to concrete, wood or steel. It acts as a cushion coat on concrete. It is applied at 1/4" thick.
  • PolyCoat - 100% solid epoxy coating and resurfacing compound. It is used as a body coat at the rate of 3/16" thick. Apply two grout coat. Total thickness of the floor is 1/4" thick.
  • Polythane - Two component aliphatic polyurethane which is highly chemical and highly abrasion resistant. Two coats of Polythane are applied at the rate of 6 mills dry thickness as the finish coats.
  • Game Lines - According to the plans and color codes.

Curing, Cleaning, And Protection:

  • Special flooring should be cured according to the manufacturer's directions. Application temperature is between 50°F to 80°F. After the final coats wait 48 hours
  • Protect the special flooring from damage/wear. Use protective covering (construction paper, ply wood, plastic sheets etc).
  • Clean special flooring just prior to final inspections. Use water & mild detergents to clean the floor.