PolyCoat HTH

PolyCoat HTH

PolyCoat HT is a unique 100% solid Epoxy Floor Coating and resurfacing system. It is chemical resistant, high temperature resistant, the surface can be steam cleaned every day. PolyCoat HT is odorless, non-toxic and used in food processing areas particularly for Commercial Kitchens, Boiler Rooms, Industrial and Institutional flooring.

Tests Results Test Method
Pot Life @ 75F 30 minutes  ASHTO-T237
Curing temperature limits 40°F and up  
Initial Set Time @ 75F 6-8 hours   
Mixing Ratio by Weight 100:18:00  
Application Trowel, roll   
Viscosity @ 75F 500-700 CPS   ASTMD-2393
Tensile Strength 6,000-7,000 PSI  ASTMD-638
Tensile Elongation 1-3%   ASTMD-638
Tensile Strength (Mortar) 2300 PSI ASTMC-307
Compressive Strength 14,000 PSI  ASTMD-695
Compressive Strength Mortar 12,000 PSI  ASTMD-695
Flexural Strength 4750 PSI ASTM-580
Hardness Shore D 85 ACTMD-2240
Bond Strength 100% concrete failure  ASTMC-882
Bond Strength  435 PSI ACI-403 Federal Test Method STD-406, M7011
Indentation No indentation MIL-D-3134F
Flammability Self extinguishing by this test as determined with a backing of concrete ASTMD-635
Water Absorbtion 0.08% Max ASTMC-413
Thermal Coefficient of Linear Expansion 2.3 X 10-5 in./in./°FA  ASTMD-696
Abrasion Resistance 0.17 gm ASTMD-1044, C-10 wheel, 1000 gm. load, 1000 cycles
Distortion Temperature  300°F  
Coverage Coating: 75 - 100 SQ FT/gallon
Mortar - 1

Recommended Uses:

  • Commercial
  • Institutional and Industrial flooring
  • Food
  • Pharmaceuticals
  • Production areas
  • Commercial Kitchens
  • Boiler Rooms

**particularly areas where high temperature resistant is required**


  • Solvent Free
  • Clear
  • Available in Colors
  • Chemical Resistant
  • Excellent bond to Concrete, Wood and Steel
  • Medium Gloss