| Tests |
Results |
Test Method |
| Color |
Gardner 2 (clear) |
|
| Viscosity |
200 cps max |
|
| Solids |
40 + 2% |
|
| Flexibility |
No Cracking or Break |
1/8" mandrel |
| Abrasion Resistance |
20 mgs max |
Taber Abraser 100 - Cycles/1000 gm/ CS 10 Wheel |
| Impact Resistance |
160 in/lb |
|
| Tensile Strength |
5000 PSI |
|
| Tensile Elongation |
80% |
|
| Hardness |
36 |
Taber Abraser 100 Cycles/1000 gm/ CS 10 Wheel |
| Set To Touch |
45 Min. |
|
| Tack Free |
90 Min. |
|
| Hard Dry |
6 Hours |
|
| Pot Life |
Unlimited |
|
Uses
- Terrazzo Sealer
- Concrete Floor Finish
- Wood Floor Finish
- Decrochip Floor Systems Finish
Advantages
- Non-Yellowing
- High Abrasion Resistance
- High Mar Resistance
- High Gloss
- Good Flexibility
- Good Impact Resistance
Use Instructions
SURFACE PREPARATION:
Surfaces should be free of dirt, oil, grease, and other contaminants or coatings which might interfere with proper adhesion.
CONCRETE and TERRAZZO:
Remove oil and grease with a detergent followed by thorough rinsing and drying.
WOOD:
Remove coating and finishes by thoroughly sanding.
STEEL:
Remove grease and oil; then sandblast.
APPLICATION:
Apply Polythane - 1001 by brush or roller. Change brush or roller as soon as material on them becomes tacky.
Do not leave containers open for long periods as Polythane - 1001 cures with moisture from the air. Provide adequate ventilation when Polythane - 1001 is used indoors.
COVERAGE:
Concrete 200-250 sq.ft./gal.
Wood 200-250 sq.ft./gal.
Steel 300-350 sq.ft./gal.
Coverage will depend on surface porosity and texture.
Shelf Life: 1 year