Tests |
Results |
Color
|
Part A Amber Also available with Part B Amber tracer dyes.
|
Viscosity of Part A Base
|
500-600 CPS
|
Viscosity of Part B Hardener |
120-200 CPS
|
Mixed Viscosity
|
250-350 CPS |
Pot Life |
30-35 Min |
Tensile Strength
|
5000 PSI
|
Tensile Elongation
|
1-3%
|
Tensile Modulous
|
200,000-300,000 PSI
|
Compressive strength
|
10,000 PSI
|
Compressive Modulous
|
250,000-320,000 PSI
|
Mixing Ratio
|
2 Part Base 1 Part Hardener by Volume
|
ADVANTAGES
· Moisture Insensitive
· Low viscosity
· No-shrinkage
· Extremely high strength
· Fast Curing
· Fills cracks up to 0.005"
USES
Grouting and pressure grouting.
Restoring structural and design strength to cracked concrete structures.
Prevents corrosion of reinforcing steel by preventing water contact and eliminates spalling of concrete initiated in cracks by freeze thaw cycles.
Concrete columns, bridge supporting members, concrete pipes, storage tanks, concrete walls, floors, foundations, aircraft runways, wood structures, sewage treatment plants etc.
SURFACE PREPARATION
Cracks should be clean, sound and free of all debris and dust.
VERTICAL CRACKS
Install injection parts at appropriate intervals using PolyInjection Gel. Now inject the PolyInject by injection pump or 8 oz. Sem-Kits.
HORIZONTAL CRACKS
"Vee" out cracks. Pressure inject the PolyInject or gravity feed. PolyInject is available in 8 oz. Sem-Kits.